This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.
Congratulations, your order qualifies for free shipping! You are €100 away from free domestic shipping.

Free domestic shipping on orders over €100

Cart 0

No more products available for purchase

Add order notes
Estimate shipping
Subtotal Free

View cart
Shipping, taxes and discount codes are calculated at checkout
Natural Black Out Bamboo Roller Blinds, The Fine Store
Natural Black Out Bamboo Roller Blinds, The Fine Store

Natural Black Out Bamboo Blinds


Made to measure

The blinds can be tailored to your exact needs. Choose the size you wish to customize and leave the desired dimensions in the comments section at check out.


These Black Out Bamboo Roller Blinds are made with flat 9 mm wide bamboo sticks that are closely woven together, blocking out sunlight almost completely.

The natural bamboo has been slightly darkened using a heating process, allowing the bamboo to be colored all the way through. They are equipped with metal loops for easy mounting and can be rolled up using the cotton pull up cord.


9 mm bamboo slats, cotton thread and pull up cord

Light blocking factor


About Color & Co

Being passionate about sustainability, Color & Co contributes towards a more environmentally-friendly world, which is expressed in their all natural and high quality blinds.

Made to order

All blinds are produced on order and can therefore not be exchanged or returned. Please double check your measurements before placing your order.

Easy to install

Ships in 4 to 5 weeks

Free domestic shipping on orders over €100

Complete the look:

Natural Black Out Bamboo Blinds

Measuring cord pull blinds

Inside mount

Step 1

For the width of the blinds, measure across the top, middle, and bottom of the widow frame.

Step 2

If you are fitting into a recess, make a note of the smallest measurement, then deduct a minimum of 1 centimeter. This will be the finished size for the width.

Step 3

Then, do the same for the drop — measuring from the top of the recess down to the bottom of the window. Note down the smallest measurement. If you are fitting into a recess then subtract at least 3 centimeters. This will be the finished size for the height of the blind. Only use this measurement if you do not want a small roll at the bottom of the blind.

The standard measurement of the blind is the measurement of the actual bamboo material from edge to edge. The fixtures on the top of the blind (metal loops) measure another 2 cm.

Take into account the type of hooks that you want to use to mount the blinds and whether these will be placed horizontally or vertically. Included are hooks for horizontal mounting.


Example 1 The window frame measures 150 cm from top to bottom. The blinds must be cut at a maximum of 147 cm if you would like them to hang them without being rolled up at all.

If you would like the blinds to hang within the window frame and go all the way to the edges width-wise, subtract 1 cm from the measurements of the window frame – then the blinds can be rolled up and down without hitting anything.

Example 2 The window frame measures 120 cm in width. The blinds must measure 119 cm in order to be rolled up and down without touching the window frame.

In an old building with crooked windows, we generally recommend leaving 1 cm on either side – so here you substract 2 centimeters from the width. You can always substract more, depending on your taste, leaving more of the window frame in sight.


The blinds can be trimmed both in width and length. The trimming can be selected when you select the product.

When you consider trimming the blind length-wise, be advised that we recommend some extra length (about 10 to 15 cm) to hang as a little roll which makes trimming in some cases unnecessary. The roll is visually appealing and keeps the blinds in position by adding some weight at the bottom, this avoids fluttering.

This solution will make your blinds fit nicely, as you can always adjust the length to keep the gap at the bottom to a minimum. Moreover, it avoids the blinds to be too long when possible stretching occurs over time and a very precise length was initially desired. It just makes things easier.

We do not recommend adjusting the blinds yourself.

Cord pull

The cord pull is placed on the right side of the blinds by default. A surcharge occurs if you wish the cord pull to be replaced to the left, just leave your wishes in the comment field when checking out.

Measuring chain pull blinds

Inside mount (in de dag)

Step 1

First, using a metal tape measure, measure across the top of the window, the middle, and the bottom.

Step 2

The narrowest measurement of the three is the measure we call the recess width.

Step 3

Then, do the same for the drop — measuring from the top of the recess down to the bottom of the window sill. This will be the finished size for the height of the blind.

These will be the dimensions when placing the order on our website.

Check that your recess is deep enough to fit the blind into, also bearing in mind any obstructions such as window or handles.

Please note that the fabric width will always be narrower than the recess width, leaving a gap of approximately 2 to 2.5 cm on each side of the blind.

Outside mount (op de dag)

Step 1

Measure across the top, middle and bottom of the window frame. Add around 10 cm to the biggest width dimension to minimize light leakage, this can be more or less according your wishes.

Step 2 – Then, do the same for the drop — measuring from the top of the recess down to the bottom of the window. The overlap at the bottom is a matter of personal choice but please take into account obstacles such as radiators.

Leave these dimensions in the comment field when checking out.

If you have a window frame around the window, please take this into account and adjust the width accordingly.


Delivery time

The production of blinds takes approximately 4 weeks. When ready they will ship straight away and delivered in about a week, depending on your destination.

Get in touch

Got questions? Get in touch with us any time!

Shipping costs

The Netherlands

We are happy to offer free delivery on all domestic orders over €100.

Orders with a lower value ship for €7 and €5 when it fits a mailbox.


Regular orders to Germany and Belgium ship for €8. Customers from France, Luxembourg, Austria and Denmark pay €12.

The standard shipping costs for Spain, Italy, Portugal and most other European countries are €16.

An additional shipping fee may be added when orders exceed standard dimensions.

Rest of the world

We offer worldwide shipping of small items and accessories. Standard international shipping costs are based on the weight of your order and are calculated at check out.

For larger items, please get in touch to receive a quote.

Continue shopping

Browse our most popular collections